Tel: 0086-571-63806068; 0086-571-63711876

Contact
Hangzhou Jingyi Chemical Co.,Ltd
Tel: 0086-571-63806068,63711876,63665132
Fax: 0086-571-63751569,63806098
E-mail: Bentonite@zjfhht.com
ADD: NO.68 Huaqiao Road, Lin'an City, Zhejiang Province, China PC:311300
You are here : Home > Products > Rheological Additive For Solvent Based System (organoclay) > ContentProducts
BK-283
BK-283
Products Specifications:
BK®-283 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.
 
 
1.      Advantages:
 
High gelling efficiency over low to medium polarity organic liquids.
Ideal thixotropic and anti-sagging property.
High viscosity and excellent thickening property over a wide temperature range.
Imparts particle suspension, preventing hard settling of pigment and fillers.
Exerts strong film reinforce action in organic binder systems.
 
 
2.      Typical Properties:
 
Color Appearance Density Moisture
(@105,2hrs)
Fineness through 200 mesh Loss on Ignition
( @1000 )
Light Yellow Free Flowing Powder 1.6g/cm3 3.5% ≥95% ≤42%
 
3.      Typical Applications:
 
Petroleum Lubricating grease Mineral Oil Lubricating grease
Polyester Lubricating grease Inks
Vegetable Oil Lubricating grease Adhesives
   
 
4.      Incorporations:
BK®-283 belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.
 
Polar Activator: Dosage of polar activator ( such as propylene carbonate, 95%ethanol , acetone or 95% methanol) is 30%-45% by weight of BK®-283.
It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result
in poorer viscosity development.
 
Recommended Procedures:
1)      Heat the specific oil to 6070
2)      Add BK-283 (7-10% by weight of total formula),mill for 5-10min.
3)      Add polar activator(3% by weight of total formula), then add other additives,mill for 25-30min.
4)      Using pump for getting through colloid grinding or homogenizer.
5)      Remove air,filtrate and package.
 
In other systems like inks, heating is not necessary. Increasing dispersion speed,prolong dispersion time or enhance the temperature will improve the efficiency of BK-283.
5.      Recommended Levels:
The amount of BK®-283 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total
formulation weight.
6.      International Countertypes: Claytone®40
Hot Tags: BK-283

Previous: BK-286

Next: BK-192T