GENERAL INFORMATION
BK-AT is an organically modified metal ion silicate with high safety, non-toxic, low additive level and anti-microbial and anti-mold effect is remarkable and does not produce resistance.
BK-AT is not loaded with heavy metals, and has more efficient, fast, long-lasting, broad-spectrum antibacterial properties, thus eliminating the breeding ground for mold and bacteria, and achieving the purpose of antibacterial and anti-mold
It can be applied to the antibacterial and antiviral of interior and exterior wall architectural coatings and plastics, etc.
PHYSICAL PROPERTES
Color/Form |
Off-white,finely powder |
Moisture content(@105℃,2hrs) |
≤10.0% |
Loss on Ignition |
40% Max at 1000℃ |
Fineness(200 mesh) |
≤95% |
APPLICATION
BK-AT is a kind of antibacterial and anti-mildew material which does not contain biotoxic drugs and has both antibacterial and anti-mildew effects. It can be widely used in water-based coatings for interior and exterior walls of buildings, bathroom, basement and other wet surfaces, wood-plastic panels, flooring, wallpaper, concrete walls and other antibacterial and anti-mildew of various building materials. It can also be used in marine paint, metal paint and other paint films.
ADVANTAGE
Broad-spectrum antibacterial: excellent antibacterial properties, mold, humidity and heat resistance, and pollution resistance.
Safe and environmentally friendly: harmless to human body after coating, safe to use and transport.
Highly effective antibacterial: the minimum antibacterial concentration can reach 0.125mg/mL, not easy to precipitate, good durability.
Long-lasting antibacterial: small particle size of the product, easy to disperse evenly, can inhibit the growth of mold or harmful bacteria on the surface of the coating for a longer period of time.
Good compatibility: compatible with a wide range of cationic and non-ionic additives;
Antiviral: 99% antiviral rate against influenza A virus H3N2.
INCORPORATION
The order of addition of BK-AT is to be added to aqueous coatings together with powder fillers. The recommended dosage is 0.1% by weight of total formulation.This product is not recommended for use in coatings or paint films without fillers.
CERTIFICATIONS
ISO 9001 Quality System, ISO 14001 Environmental Management System, ISO 18001 Safety System
Previous:PU Thickener BK-C278
Next:PU Thickener BK-C20F